
Oak Engineered
Herringbone Natural Oak 750mm
Natural Oak 750mm is a large-format engineered European oak herringbone with a light wire-brushed matte surface, 3 mm veneer and completed Kew installation evidence.
Colour
Natural Oak
Format
Herringbone
Product overview
Published product details, performance information and installation guidance.
Natural Oak 750mm uses longer and wider pieces than compact parquetry, producing a more open herringbone rhythm across living areas, kitchens and hallways. The natural oak colour and light wire brushing keep the grain visible without adding a heavy stain, while Prime (ABC) grading provides a cleaner appearance with controlled timber variation. Each 750 × 150 × 14.5 mm engineered board has a 3 mm European oak veneer, bevelled edges, tongue-and-groove joint and eight to ten coats of UV lacquer. The format is supplied as matched left- and right-tongue boards and requires a full-trowel direct-stick installation. Floating and nail installation are not specified. Hydronic heated slabs are supported only when the current heated-slab guide is followed and the slab surface remains at or below 26 degrees Celsius. Published range warranty information lists 20-year residential wear, 10-year commercial wear and lifetime structural cover, subject to current terms. A completed Kew case study uses this exact product through the living areas, kitchen and upper landing, providing real evidence of its scale and pattern continuity.
Specifications
A consistent specification order is used across every product.
- Product code
- HB-750-NATURAL-OAK
- Colour
- Natural Oak
- Timber species
- European Oak
- Format
- Herringbone
- Grade
- Prime (ABC)
- Finish
- Matte, Wire Brushed
- Construction
- Engineered timber
- Joint / locking system
- Tongue-and-groove
- Wear layer
- 3 mm
Available sizes
Length × width × thickness
750 × 150 × 14.5 mm
Length
750 mm
Width
150 mm
Thickness
14.5 mm
Wear layer
3 mm
Product notes
Full-trowel direct-stick installation only; floating and nail installation are not specified. For hydronic heated slabs, follow the current heated-slab guide and keep the slab surface at or below 26 degrees Celsius. Other underfloor heating systems are not listed as compatible.
Installation
Supported methods
Direct stick
Underfloor heating
Compatible, subject to confirmed installation requirements
Continue comparing
More in this format

Oak Engineered · Herringbone
Herringbone Balinese Oak 750mm
Balinese Oak

Oak Engineered · Herringbone
Herringbone Mink Grey 750mm
Mink Grey

Oak Engineered · Herringbone
Herringbone Raw Oak 750mm
Raw Oak

Oak Engineered · Herringbone
Herringbone Gunsynd Oak 750mm
Gunsynd Oak

Oak Engineered · Herringbone
Herringbone Parisien Grey 750mm
Parisien Grey

Oak Engineered · Herringbone
Herringbone Prescott Oak 750mm
Prescott Oak
Installation evidence
Completed projects using this product
Confirmed Alpine Woods Flooring case studies linked to this exact product.

Canterbury
Natural Oak Herringbone Flooring in Canterbury
GrandOak Natural Oak 14.5/3 engineered herringbone flooring was installed through the living, kitchen and hallway areas of this Canterbury residence.

Kew
Natural Oak Herringbone Flooring in Kew
Natural Oak engineered herringbone flooring was installed through the living areas, kitchen and upper landing of this Kew residence. The interior designer selected the floor, which was fully bonded to the substrate.
Confirm the material in your space.
Bring plans, finishes, or reference images to a product discussion.
Request product advice