Oak Engineered

Herringbone Prescott Oak 750mm

Name: Herringbone Prescott Oak 750mm
SKU: HB-750-PRESCOTT-OAK

Herringbone Prescott Oak 750mm is Prime (ABC) grade engineered European oak herringbone flooring in a 750 × 150 × 14.5 mm profile with a 3 mm veneer and matte, wire brushed.

Colour

Prescott Oak

Format

Herringbone

Product overview

Published product details, performance information and installation guidance.

Herringbone Prescott Oak 750mm uses a 3 mm European oak veneer in a 750 × 150 × 14.5 mm engineered timber profile. The boards use tongue and groove joining with bevelled edges and have a matte, wire-brushed finish protected by 8–10 coats of UV lacquer. Published pack information is 1.35m² at 13 kg, with 12 full-length boards: 6 left-hand and 6 right-hand. This patterned profile requires direct-stick, full-trowel glue-down installation; floating and nail installation are not specified. It is compatible with hydronic heated slabs when installed to the current guide, with the slab surface kept at or below 26°C; other underfloor heating systems are not specified. Published technical data lists P3 wet slip resistance, D1 dry slip resistance, a 20-year residential wear warranty, a 10-year commercial wear warranty and a lifetime structural warranty.

Specifications

A consistent specification order is used across every product.

Product code: HB-750-PRESCOTT-OAK
Colour: Prescott Oak
Timber species: European Oak
Format: Herringbone
Grade: Prime (ABC)
Finish: Matte, Wire Brushed
Construction: Engineered timber
Joint / locking system: Tongue-and-groove
Wear layer: 3 mm

Available sizes

Length × width × thickness

750 × 150 × 14.5 mm

Length
750 mm

Width
150 mm

Thickness
14.5 mm

Wear layer
3 mm

Product notes

Direct-stick, full-trowel glue-down installation only; floating and nail installation are not specified. Hydronic heated slabs only: follow the current heated-slab guide, keep the slab surface at or below 26°C and do not use other underfloor heating systems.