Oak Engineered

Tinge Clay Herringbone

Name: Tinge Clay Herringbone
SKU: 3005

Tinge Clay Herringbone is a Prime-grade engineered European Oak herringbone floor in a 600 × 120 × 15 mm profile with a 3 mm wear layer.

Colour

Tinge Clay

Format

Herringbone

Product overview

Published product details, performance information and installation guidance.

Tinge Clay Herringbone presents a soft clay-neutral oak tone with gentle warmth. Natural timber varies from board to board, so the final colour and grain should be checked against current physical samples in the intended room. The engineered European Oak herringbone boards measure 600 × 120 × 15 mm and have a 3 mm top layer, Prime (ABC) grading, a brushed UV-lacquer finish and four-sided micro-bevel edges. The tongue-and-groove profile is manufactured at 8–12% moisture content. Each pack covers 1.152 m² and contains 16 boards at a published pack weight of 11 kg; the manufacturer lists no random short boards. Direct-stick installation is specified. Published testing records P3 wet slip resistance, 4.8 kW/m² mean critical radiant flux and a 35 %.min mean smoke value. Underfloor-heating compatibility is not confirmed in the reviewed product page and should not be assumed.

Specifications

A consistent specification order is used across every product.

Product code: 3005
Colour: Tinge Clay
Timber species: European Oak
Format: Herringbone
Grade: Prime (ABC)
Finish: Brushed UV lacquer with four-sided micro bevel
Construction: Engineered timber
Joint / locking system: Tongue-and-groove
Wear layer: 3 mm

Available sizes

Length × width × thickness

600 × 120 × 15 mm

Length
600 mm

Width
120 mm

Thickness
15 mm

Wear layer
3 mm

Product notes

Direct-stick installation only over a prepared, dry and level substrate. Confirm substrate flatness, moisture condition, pattern set-out and adhesive compatibility before installation. Underfloor-heating compatibility is not confirmed for this product.