Laminate Hinton Walnut 12mm

Laminate Hinton Walnut 12mm presents a deep walnut-brown oak visual with curved grain peaks and a low-gloss appearance. The colour should be checked against a current physical sample in the intended room because screen reproduction and lighting can change how the finished floor reads. Each plank is 2240 × 195 × 12 mm with a Super Matte surface, four-sided micro bevel, moderate pattern variation, an AC4 commercial-grade wear rating and an Angle-to-Angle click joint. A carton contains five full-length boards, covers 2.184 m² and weighs 23 kg. Published limited warranty terms list 30 years for residential use and 8 years for eligible commercial use. Installation is floating only over suitable underlay; the boards must not be direct-stuck, nailed, screwed or fixed to the subfloor. The core has up to 96 hours of household moisture resistance, but it is not waterproof: clean spills promptly and do not install it in bathrooms, laundries, toilets, saunas or other wet areas. Current technical and installation sheets list hydronic heated slabs as compatible, while the current warranty excludes floor-heating installations, so written project confirmation is required before specification.

Product notes

Floating installation only over suitable underlay; do not direct-stick, nail, screw or glue the boards to the subfloor. Allow a 10-12 mm perimeter expansion gap (15-20 mm in high-humidity regions) and follow the current 16 x 10 m maximum raft, moisture-barrier and substrate requirements. Up to 96 hours of household moisture resistance is not waterproofing; clean spills promptly and exclude bathrooms, laundries, toilets, saunas and other wet areas. Technical and installation sheets list hydronic heated slab compatibility, but the current warranty excludes floor-heating installations; obtain written confirmation for the project before purchase.

Installation