
Oak Engineered
Harvest 190mm Plank
Harvest 190mm Plank is a 14 mm engineered European Oak straight-board floor in a medium warm-brown oak tone, with 1900 × 190 mm boards and premium AB grading.
Colour
Harvest 190mm Plank
Format
Plank
Product overview
Published product details, performance information and installation guidance.
Harvest 190mm Plank presents a medium warm-brown oak tone. Real European Oak has unlimited natural variation, so colour, grain and feature placement differ between boards and should be reviewed against a current physical sample. The engineered boards measure 1900 × 190 × 14 mm. Each 2.166 m² pack contains six full lengths with 25% nested boards. The published surface is brushed satin with seven layers of UV-cured lacquer and premium AB grading; the manufacturer does not publish a veneer thickness in millimetres for this product. The tongue-and-groove profile supports professional direct-stick or floating installation. Published certifications include P3 slip resistance and E1 emissions. The manufacturer publishes a 30-year residential wear warranty and a 5-year medium-commercial wear warranty. Underfloor heating is compatible only when the current European Oak temperature and commissioning limits are followed.
Specifications
A consistent specification order is used across every product.
- Product code
- 915205
- Colour
- Harvest 190mm Plank
- Timber species
- European Oak
- Format
- Plank
- Grade
- Select (AB)
- Finish
- Brushed satin surface with seven layers of UV-cured lacquer
- Construction
- Engineered timber
- Joint / locking system
- Tongue-and-groove
- Wear layer
- Seven layers of UV-cured lacquer (manufacturer-published surface system; veneer thickness not specified)
Available sizes
Length × width × thickness
1900 × 190 × 14 mm
Length
1900 mm
Width
190 mm
Thickness
14 mm
Product notes
Professional direct-stick or floating installation. The manufacturer lists subfloor flatness of 4 mm over 2 m, tile grout lines no wider than 8 mm, skirting or scotia at walls, a maximum floating raft of 8 m × 12 m and a maximum direct-stick raft of 10 m × 20 m. For underfloor heating, keep floor temperature at or below 27°C and room temperature at or above 18°C. Keep the initial floor temperature at or below 21°C for 24 hours before and 48 hours after installation, then increase it by no more than 2.8°C per day.
Installation
Supported methods
Direct stick, Floating
Underfloor heating
Compatible, subject to confirmed installation requirements
Confirm the material in your space.
Bring plans, finishes, or reference images to a product discussion.
Request product advice


