Australian Timber

Brushed Blackbutt Herringbone

Name: Brushed Blackbutt Herringbone
SKU: 2001

Brushed Blackbutt Herringbone is a Select-grade engineered Blackbutt herringbone floor in a 680 × 136 × 15 mm profile with a 3 mm wear layer.

Colour

Brushed Blackbutt

Format

Herringbone

Product overview

Published product details, performance information and installation guidance.

Brushed Blackbutt Herringbone presents warm golden Australian timber tones with natural movement. Natural timber varies from board to board, so the final colour and grain should be checked against current physical samples in the intended room. The engineered Blackbutt herringbone boards measure 680 × 136 × 15 mm and have a 3 mm top layer, Select (AB) grading, a brushed UV-lacquer finish and four-sided micro-bevel edges. The tongue-and-groove profile is manufactured at 6–9% moisture content. Each pack covers 1.48 m² and contains 16 boards at a published pack weight of 15.5 kg; the manufacturer lists less than 25% nested boards. Direct-stick installation is specified. Published testing records P3 wet slip resistance, 3.3 kW/m² mean critical radiant flux and a 76 %.min mean smoke value. Underfloor-heating compatibility is not confirmed in the reviewed product page and should not be assumed.

Specifications

A consistent specification order is used across every product.

Product code: 2001
Colour: Brushed Blackbutt
Timber species: Blackbutt
Format: Herringbone
Grade: Select (AB)
Finish: Brushed UV lacquer with four-sided micro bevel
Construction: Engineered timber
Joint / locking system: Tongue-and-groove
Wear layer: 3 mm

Available sizes

Length × width × thickness

680 × 136 × 15 mm

Length
680 mm

Width
136 mm

Thickness
15 mm

Wear layer
3 mm

Product notes

Direct-stick installation only over a prepared, dry and level substrate. Confirm substrate flatness, moisture condition, pattern set-out and adhesive compatibility before installation. Underfloor-heating compatibility is not confirmed for this product.