American Timber

Denali

Denali is a 15 mm engineered American Red Oak floor with an organic neutral timber tone with restrained knots and softly defined grain, a 4 mm wear layer and Select AB grading.

Colour

Denali

Format

Plank

Product overview

Published product details, performance information and installation guidance.

Denali presents an organic neutral timber tone with restrained knots and softly defined grain. Natural timber varies from board to board, so the colour should be checked against a current physical sample in the intended room. The single-strip engineered plank is 1900 × 190 × 15 mm with a 4 mm American Red Oak top layer, Select AB grading, a matte UV-lacquered surface and bevelled edges. Each nested-length pack covers 2.166 m² and may include boards from 600 mm to the full 1900 mm length. Published warranty terms list lifetime structural cover, 20 years of residential wear cover and 10 years of eligible commercial wear cover. The tongue-and-groove boards may be installed by full-spread direct stick or as a floating floor over suitable underlay; they are not approved for nailed or screwed installation. Hydronic heated-slab installation is supported only when the current heated-slab guide is followed, including a maximum slab-surface temperature of 26°C. The product is intended for dry interior areas and is not suitable for wet areas.

Specifications

A consistent specification order is used across every product.

Product code: AO-15-DENALI
Colour: Denali
Timber species: American Red Oak
Format: Plank
Grade: Select (AB)
Finish: Matte finish with 8–10 coats of UV lacquer and bevelled edges
Construction: Engineered timber
Joint / locking system: Tongue-and-groove
Wear layer: 4 mm

Available sizes

Length × width × thickness

1900 × 190 × 15 mm

Length
1900 mm

Width
190 mm

Thickness
15 mm

Wear layer
4 mm

Product notes

Use either full-spread direct-stick installation or floating installation over a suitable underlay. Do not nail or screw the boards to the subfloor. Follow the current substrate, moisture-barrier, adhesive, expansion-gap and raft-size requirements. Hydronic heated slabs are compatible only under the current heated-slab instructions, with the slab surface kept at or below 26°C. Wet areas are excluded.